Powerful High-Pressure Pumps • Advanced Flushing Technology • Rugged Off-Road Chassis • Designed for Efficient Sand, Scale, and Paraffin Removal
An oilfield flushing truck supplies fluid at a controlled rate and pressure for well cleanout, tubing flushing and related circulation work. The cleaning method depends on the deposits, well geometry, fluid and available return path. Specify those conditions when choosing the pump, fluid supply and pressure-control equipment.
A flushing truck can provide pumping support for a coiled-tubing operation, but the coiled-tubing equipment and its responsibilities form a separate supply boundary. Confirm the required connections and operating envelope for both packages before selecting the truck configuration.
Vance Petroleum can review the pumping duty, tank requirements, chassis interfaces and requested controls with the project team. Compare the proposed configuration using an identified equipment schedule, engineering documents and an agreed acceptance plan. The control and instrument package should provide the measurements and operating functions required for the specific job.

Match the plunger pump and fluid end to the required simultaneous pressure and flow, fluid properties and continuous operating schedule. Request the performance basis for the installed drive and pump combination.

Define the well or surface-line connection, hose route and any cleaning tools required by the approved job. Confirm the suitability and supply responsibility of each assembly rather than assuming a standard nozzle fits every operation.
Select usable tank volume from fluid consumption, refill logistics, density and the complete vehicle loading case. Identify any transfer equipment and clean-fluid supply provided by the site.

Where the job requires dosing, specify the chemical, compatibility requirements and metering range. Identify the tank, pump and mixing equipment included in the offer.

Choose the chassis and power arrangement against the route, payload and stationary pumping duty. Review mounting, axle loads, service access and destination support for the actual offered vehicle.

Specify the required pressure, flow, temperature and tank-level information, local or remote commands and recording functions. Agree on the control behavior and acceptance tests for the installed package.
List the applicable project codes, destination requirements and inspection documents in the enquiry. Review the supporting records for the offered configuration as part of equipment acceptance.
Review access to routine service points, the initial spare-parts schedule and component identification. Include any special tools or service assistance needed for the operating campaign.
| Parameter | Specification |
|---|---|
| Model | Identify the offered truck, pump and fluid-end references in the quotation. |
| Pump Type | Plunger-pump configuration selected for the specified fluid and duty. |
| Maximum Working Pressure | State the required pressure together with the available flow and the measurement location. |
| Maximum Flow Rate | Confirm delivered flow at each agreed pressure and continuous-duty condition. |
| Water Tank Capacity | Select nominal and usable volumes from fluid autonomy, density and payload. |
| Chemical Additive Tank | Optional; define chemical compatibility, usable volume and dosing scope. |
| Engine | Confirm the installed drive, continuous power and auxiliary-load allowance. |
| Chassis Configuration | Select from route access, axle loads, mounting interfaces and destination requirements. |
| Flushing Head / Nozzle System | Define the required connection and job-tool assemblies in the supply schedule. |
| Control System | Specify measurements, control stations, recording and protective functions. |
| Operating Temperature Range | State separate operating, cold-start and storage conditions for supplier review. |
| Codes and inspection | Project-specific; define required codes, destination compliance and independent inspection in the purchase specification. |
| Design Life | Confirm the design basis, duty cycle and maintenance assumptions in the offered equipment documentation. |
Specify the required solids-transport duty, well geometry and return-handling arrangement for sand and debris circulation.
Use deposit analysis and the approved treatment program to define the fluid, tools and any chemical-dosing requirement.
Review wax characteristics, temperature limits, fluid compatibility and circulation losses before selecting any heating or chemical option.
Define circulation and debris-removal requirements with the responsible well engineer before stimulation.
Provides high-pressure fluid supply for continuous circulation during coiled tubing cleanout, milling, and fishing operations.
Assess the cause of restricted injection and the approved cleanout objective before choosing the pumping duty.

Left Side Profile

Right Side Profile

Left Front 3/4 View

Right Rear 3/4 View

Direct Front View

Direct Rear View

Left Side Orthographic View

Right Side Orthographic View

Left Front Angle

Right Front 3/4 View

Left Rear 3/4 View

Right Rear Angle

Top-Down Aerial View

High-Pressure Flushing Pump Close-Up

Flushing Head / Nozzle Assembly

Operator Control Panel

Hydraulic Power Unit

Water Tank and Piping System

Chemical Additive Injection Module

Chassis and Outrigger System

Safety and Instrumentation Close-Up
Compare hydraulic performance and total commercial scope against the same approved duty and acceptance procedure.
Pump, tank, chassis, control systems, cold-weather packages — fully tailored to your wells and operations.
Configurations are reviewed for the destination climate, altitude, road limits and operating duty.
Agree on remote assistance, spare-parts supply, commissioning and training scope for the destination and operating schedule.
Discuss the required pumping configuration, engineering documents and service plan with the equipment team.
Henan Vance Petroleum Machinery Co., Ltd. (Vance Petro) is a professional manufacturer of petroleum machinery and oilfield well-servicing equipment headquartered in Puyang City, Henan Province, China. We specialize in the design, manufacture, and global supply of high-performance oilfield equipment, including oilfield flushing trucks, cementing units, fracturing equipment, coiled tubing units, and a comprehensive range of well servicing machinery.
Request the production, inspection and factory acceptance scope for the ordered configuration, including the records required before shipment. Request the current quality-system documentation and the applicable product conformity records for the offered equipment.
Don't let sand, scale, paraffin, and debris rob your wells of their production potential. Contact our team today for a detailed quotation.
Compare configurations, define the supply boundary and prepare the evidence needed for an equipment quotation.